U-bend drying tube

Item No.: BLYQ8
U-bend drying tube
Product description:
1. Fine scrub
2. Various specifications
3. High light transmittance
4. High corrosion resistance
5. International standards
6. Glass is mechanized production
7. Specifications: 14#~ 29#
Description
 

 

U-bend drying tube
Product description:
1. Fine scrub
2. Various specifications
3. High light transmittance
4. High corrosion resistance
5. International standards
6. Glass is mechanized production
7. Specifications: 14#~ 29#

 


U elbow-shaped drying tube
product Introduction: drying tube is a kind of equipment used in chemical experiments to dry gas or remove impurities from gas. Usually, there is a connection port at both ends for connecting the catheter, and a solid desiccant or impurity remover is contained in the middle. When the gas flows into the drying tube from one end, the water or other impurities in the gas react with the desiccant or the impurity to separate the water or the impurity from the gas, and the relatively pure gas flows out from the other end.
 
 
 
 


Purpose:
 
it is suitable for the laboratory of schools and factories, drying a small amount of gas, or filtering impurities in the gas, or preventing the substances in the device from absorbing moisture.
U in addition to the above uses, the shaped drying tube can also be used for gas absorption in quantitative analysis of organic semi-trace the weighing operation before and after, or installed at the inlet and outlet of the instrument device, plays the role of drying and moistureproof.
With branch drying tube except U in addition to the purpose of the shape, the branch pipe is mainly convenient to connect other instruments and devices. Sometimes it can be used as a buffer connection tool without any absorbent.
The purpose of the plug drying tube is not only the purpose of the branch drying tube, but also the plug is mainly used to adjust and control the gas, which can control the time and excess of the gas.



 

How to use:
when using, clean the drying tube first. According to the characteristics of the gas to be dried, select appropriate desiccant to be loaded into the bottom or bulb of the drying tube, and then connect with the instrument and the device to be dried, which can be applied.
Connection method: One-Ball and two-ball drying tubes, as long as the tail end of the drying tube is inserted into the punched Cork, and then fixed in the device that needs to be dried; U shape, U shaped with branch tube, U the two vertical glass tubes of the drying tube with branch tubes and piston are actually the import and export of gas, as long as rubber tubes are used. Connect to the device, one end is connected to the air inlet, and one end is connected to the air outlet.


 
 
 
 
 
 

Review

1/3
X