English

Pilot stainless steel (short-range) molecular distillation

Item No.: KBTL9
Instrument Name: Pilot (short-range) molecular distillation instrument Main use: It is used for the extraction of heat-sensitive active ingredients such as natural active ingredients, flavors and fragrances, Chinese herbal medicines, foods, pesticide resi
Description basic configuration Technical Parameters Characteristics
Principle of molecular distillation :

Molecular distillation is a special liquid-liquid separation technique. It differs from traditional distillation by the principle of separation of boiling points, but by the difference in the mean free path of molecular motion of different substances. Here, the molecular motion free path (indicated by λ) refers to the distance traveled between two collisions of one molecule.
When the liquid mixture flows along the heating plate and is heated, the light and heavy molecules will escape from the liquid surface and enter the gas phase. Since the free paths of the light and heavy molecules are different, the molecules of different substances move away from the liquid surface and have different moving distances. If a condensing plate can be properly set, the light molecules reach the condensing plate and are condensed and discharged, and the heavy molecules do not reach the condensing plate and are discharged along the mixed liquid. In this way, the purpose of material separation is achieved.


Molecular distillation schematic:



Characteristics of molecular distillation technology:

As a high-tech separation technology that is synchronized with the international, molecular distillation technology has the advantages that other separation technologies can't match:
1. Low operating temperature (far below boiling point), high vacuum (no load ≤ 1Pa), short heating time (in seconds), high separation efficiency, etc., especially suitable for separation of high boiling point, heat sensitive and oxidizable substances;
2, can effectively remove low molecular substances (deodorization), heavy molecular substances (decolorization) and remove impurities in the mixture;
3. The separation process is a physical separation process, which can well protect the separated substances from being contaminated, in particular, can maintain the original quality of the natural extract;
4, high degree of separation, higher than traditional distillation and ordinary thin film evaporator.


>>> Molecular distillation technology industrial application products

1.amino acid ester \ triterpene ester of ferulic acid

2. Acrylate \ propylene glycol ester \ styrene - acrylonitrile \ lactide \ menthyl ester \ Atractylodes volatile oil \ phenyl maleimide \ cedar oil \ pineapple ketone \
Benzoic acid C12~C15 alcohol ester

3. Long-chain dibasic acid (C9-C18) \crude paraffin\herbicide\Bupleurum volatile oil\tea tree oil\Cangzhu oil\ Chuanxiong extract\silkworm oil

4.monoglyceride (glycerol monostearate monolaurate, etc.) \ (tallow and lard, etc.) decholesterol \ garlic oil \ butyl triol \ angelica extract \ hemp oil
   \2-butyl octanol \\ living extracts \ stigmasterol \ living extracts \ polysaccharide ester \ polyunsaturated fatty acid \ diethyl terephthalate \ remove PCBs 

5. octacosanol (rice wax, beeswax, cane wax) \ Dimer acid \ eicosapentaenoic acid (EPA) \ docosahexaenoic acid (DHA) \ dodecane lactone
   \Diisocyanate trimer
6.waste oil regeneration \ lycopene \ coenzyme Q \ beeswax \ furan ester \ phenolic resin \ wind extract \ fluoro oil (perfluorocarbon, chlorofluorocarbon oil, perfluoropolyether)

7.High alcohol alcohol / curing agent (removal of TDI, MDI, HDI, etc.) \Conjugated linoleic acid \ fructose ester \silicone oil (polysiloxane or polysiloxane) \ sitosterol / oryzanol
  \Cinnamon oil\Citronella oil\Scented oil\Olive oil\Platinum oil (Growth fragrant alcohol, patchouli ketone) \Dioctyl phthalate \ light stabilizer
8.Arachidonic acid (ARA) \ piperonyl butoxide \ β- carotene and carotenoids (palm oil citrus oil orange oil orange peel oil spirulina, etc.) \ Seal oil\
  \(bisphenol A and F type) epoxy resin \ pepper seed oil \ safflower seed oil \ mutual leaf white layer oil 
9.polyglyceride\polyester\polyether\polyolefin\polyethylene glycol (ester)\polyurethane\polypentenol\polytetrahydrofuran\ginger oleoresin\gingeringin\gingerol\tar
  \squalene\structural ester\erucamide amide/alkali metal refining\methylheptenone\m-methylbenzoic acid\3-methylhydrazine\hormone shrinkage\ginger oil\whaleol
10.sunflower oil \ wax → mineral oil residue dewaxing \ quinine derivative \ diffusion pump oil \ natural antioxidants 

11.asphalt dewaxing \ chili oil resin \ capsanthin \ capsaicin \ permethrin \ phosphate ester · forsythia volatile oil \ dioctyl phthalate 

12. rose oil \ rice bran oil \ gallic acid aldehyde derivatives \ hair oil deacidification (high acid value rice bran oil, wheat germ oil, pepper seed oil, etc.) \ rice bran wax \ jasmine essential oil
   \Coal tar\enzymatic fatty acid
13.naphthalene formaldehyde \ citral

14.PET regeneration (polyethylene terephthalate) \glucose derivative \ natural apple flavor \ paroxetine \ borate glycol ether 

15.Solanesol (waste tobacco leaves, potato leaves) \3-hydroxypropionitrile (HPN)

16.(mineral and synthetic) lubricating oil (poly alpha olefin, paraffin chlorinated synthetic oil, alkyl benzene synthetic oil, polyisobutylene synthetic oil) \ L-lactic acid \ rosin ester \
    \Cinnamaldehyde (cinnamon oil) \Litsea cubeba oil
17. biodiesel (fatty acid methyl ester or ethyl ester) \ triene tocopherol \ trichloronew (trichloro-2 hydroxydiphenyl ether) \ triethylene glycol \ triacontanol \ trimer acid \ diglyceride \
    Sage antioxidants \ petroleum residue \ (refining or removing) insecticides \ edible oil deacidification \ glycidyl compounds \ carboxylic acid diester (lubricating oil) \ allicin \
    Squalene (tricosahexaenoic acid) \ lauryl lactone \ bis-β-hydroxyethyl terephthalate \ acid chloride \ alkaloid derivative \ tetrazole-1-acetic acid\
    \ Trioxane recovery (natural and synthetic) \ tocopherol 
18. hydrocarbon \
olefin (ester) \ peach aldehyde \ tar oil (tall oil)

19. (natural and synthetic) fat-soluble vitamins (A, D, E, K) \ alkyl glycosides (alkyl glycosyl polyglycosyl polyglycosyl cyanide glycosides alkyl glucosides)
     \Alkylphenol\microcrystalline wax\glutaraldehyde\vitamin E acetate
20. Wheat Germ Oil\Xinyang Jasminaldehyde\Aconitee\α-Aromatic ketone\Scented sesame oil volatile oil\Geraniol\Fragrant basil

21. linolenic acid \ oleic acid amide (deep sea and fermentation) \ fish oil \ cod liver oil \ oat oil \ lanolin \ wool alcohol \ isocyanate prepolymer \ linland oil \ lauric acid
     \Omethoate (poly) glycol ester \ oleic acid diethanolamide \ lauric acid diacetamide \ glyoxylic acid \ acetaminophen ethyl acetate isomer \ linseed oil
    \Isotope uranium enrichment \ etofenamate \ ethoxylated fatty alcohol \ ethoxy fatty acid \ liquefied coal \ vinyl pyrrolidone \ corn oil \ acetyl citrate
    \ Cashew nut oil / isopropylene dicarboxylate 
22.Phytosterol\Plant wax\ Sesamin\Vacuum pump oil\Brake fluid\Medium carbon chain triglyceride (MCT)\Fatty acids and their derivatives\Plasticizer\Sensitizer
    \ sterol ester \ sucrose ester \ ionone \ ester oil (diester, polyol ester, polyester) vegetable oil deodorized distillate \ perilla seed oil \ cane wax \ palm wax
    \Sedatives\palm oil

 

Basic Parameters:
Model Evaporation area Evaporation Area m2 Feeding Rate L/h Feeding Method Material Receiving Method Equipment Height Equipment Height
HMD-06S 0.06 1~3 Differential pressure needle valve adjustment Glass receiving bottle 2000
HMD-1S 0.1 5~12 High precision gear pump Glass receiving bottle 2350
HMD-1S-2 0.1 5~12 High precision gear pump Continuous discharge pump 2100
HMD-2S 0.2 10~25 High precision gear pump Stainless steel storage tank 2650
HMD-2S-2 0.2 10~25 High precision gear pump Continuous discharge pump 2650
HMD-5S 0.5 20~60 High precision gear pump Stainless steel storage tank 3300
HMD-5S-2 0.5 20~60 High precision gear pump Continuous discharge pump 3100
HMD-10S 1 50~120 High precision gear pump Stainless steel storage tank 4450
HMD-10S-2 1 50~120 High precision gear pump Continuous discharge pump 4250
HMD-15S 1.5 60~180 High precision gear pump Continuous discharge pump 4500
HYMD-20S 2 100~200 High precision gear pump Continuous discharge pump 5000
HMD-30S 3 100~300 High precision gear pump Continuous discharge pump 6200
HMD-50S 5 200~500 High precision gear pump Continuous discharge pump 7500
High-precision gear pump

>>> Continuous distillation process flow chart

>>> Service method

  1. Jointly develop new products;
  2. Experiment with the experimental samples provided by the customer;
  3. Design, manufacture and supply a complete molecular distillation unit according to the customer's material separation requirements , specifications from 1 to 500 L / hr ;
  4. Responsible for training technicians and workers in equipment operation and maintenance;
  5. Provide comprehensive after-sales service
    >>> Contact
    Contact: Nanjing Black Ant Biotechnology Co., Ltd.
    Tel: 025-84845147 18061475147
    Fax: 025-85157035
    Address: Nanjing Gulou District Huang Jiawei No. 29209
    Postal Code: 100029
    E-mail : yuefei843310 @ hotmail .com
>>> Technical characteristics of the complete set of molecular distillation developed by our company
  1. Separate structure with unique structure, which can be applied to the separation of different characteristic systems;
  2. Developed a highly efficient centrifugal force film forming device to reduce mass transfer resistance;
  3. Developed a technology that uses the optimal temperature distribution to control separation, enhancing the separation effect;
  4. Developed a novel dynamic and static sealing structure to ensure long-term, stable high-vacuum operation of the device;
  5. Design and manufacture a high-vacuum acquisition system with stable performance according to material requirements;
  6. The evaporator is made of high borosilicate glass 3.3, the evaporation area is 2 square decimeters, 5 square decimeters, 10 square decimeters, 20 square decimeters, the vacuum degree can reach 0.1 Pa, and the distillation temperature can reach 300 °C.
  1. For special materials, a fully heated evaporator with three separate temperature-controlled chambers for evaporation zone, heavy component discharge zone, internal condensation and light component discharge zone can be customized to ensure fluidity during separation of easily solidified materials .
  2. The evaporator barrel is available in stainless steel and glass.
  3. For the customer's needs, it is also possible to customize the film forming device, feeding device and discharging device of different structures, such as roller/scraper film forming, full-insulation needle valve feeding/gear pump feeding, intermediate receiver plus flask discharging / gear pump discharge, etc.